LED single light kit 300mm

Installation takes less than 5 minutes and requires ZERO tools.

Here's the complete process:

• Step 1: Clean the surface where you want to mount the light (use rubbing alcohol for best adhesion)
• Step 2: Peel the backing off the 3M adhesive strip
• Step 3: Press the magnetic mount firmly to the surface (hold for 10 seconds)
• Step 4: Snap the LED light strip onto the magnetic mount
• Step 5: Plug in your battery adapter and you're done

LockLite works with ALL 18V batteries from these major brands:

• ✅ Milwaukee M18 (all models, including older generations)
• ✅ DeWalt 20V MAX (DCB series)
• ✅ Makita 18V LXT (BL series)
• ✅ Ryobi ONE+ 18V (all models)
• ✅ Hikoki 18V (BSL series)

What about aftermarket/knockoff batteries?
LockLite works with most aftermarket batteries, but we recommend using genuine brand batteries for optimal performance and safety.

Runtime depends on your battery capacity. Here's the breakdown:

• 2.0Ah battery: 3-4 hours of continuous use
• 3.0Ah battery: 4-5 hours of continuous use
• 5.0Ah battery: 6-8 hours of continuous use
• 6.0Ah+ battery: 8-10+ hours of continuous use

Real-world usage: Most tradies use LockLite intermittently throughout the day (turn on when accessing toolbox, turn off when working). With typical use, a 5.0Ah battery can last multiple days.

Note: LockLite does NOT have low-voltage protection built-in. Always monitor your battery level to prevent deep discharge. Low-voltage protection available separately.

LockLite produces 900 lumens of bright, even illumination.

To put that in perspective:

• 🚗 Your truck's dome light: ~50-100 lumens
• 🔦 Standard flashlight: ~300-500 lumens
• 💡 LockLite: 900 lumens

What does this mean for you?
You'll see every tool, every bolt, every detail—even in complete darkness. No more squinting. No more phone flashlights. No more guessing.

Yes, LockLite is IP67 rated—fully waterproof and dustproof.

What IP67 means:

• ✅ Can be submerged in 1 meter of water for 30 minutes
• ✅ Completely dust-tight (no particles can enter)
• ✅ Safe for rain, hose-down, and wet environments
• ⚠️ Not designed for direct pressure washing (high-pressure jets can damage adhesive)

Real-world durability:

• Survives Australian summers (tested up to 140°F / 60°C)
• Handles freezing winters (tested down to -4°F / -20°C)
• Vibration-resistant (tested on rough job site roads)
• UV-resistant casing (won't yellow or crack in sunlight)

LockLite uses industrial-grade 3M VHB (Very High Bond) adhesive—the same adhesive used to mount skyscraper glass panels.

Dual mounting system:

• Magnetic base: Holds the light strip securely (easily removable for cleaning or repositioning)
• 3M VHB adhesive: Permanently bonds the magnetic mount to your surface

Tested for extreme conditions:

• ✅ 10,000+ miles of rough road testing
• ✅ Holds in -20°C to 60°C temperature range
• ✅ Tested on corrugated truck beds, smooth toolboxes, and textured canopies

What if it does come loose?
Contact us and we'll send you replacement adhesive strips for free. But in 3+ years and 10,000+ installations, adhesive failure is extremely rare when properly installed.

We ship from our Los Angeles warehouse—not Australia.

Shipping times:

• 🚚 Standard Shipping: 3-5 business days (FREE on orders of 2+ kits)
• ⚡ Express Shipping: 1-2 business days (available at checkout)

Order processing:
Orders placed before 2 PM PST ship same day. Orders after 2 PM ship next business day.

Tracking:
You'll receive a tracking number via email within 24 hours of your order shipping.

100-Day Money-Back Guarantee. No questions asked.

Here's how it works:

• Try it for 100 days: Install it. Use it. Test it in real-world conditions.
• Not happy? Email us at usa@locklite.store or call +1 (XXX) XXX-XXXX
• We'll send you a prepaid return label (return shipping is FREE)
• Full refund within 5 business days of receiving your return

What condition does it need to be in?
We don't expect it to be brand new. If you've installed it and used it, that's fine. We just ask that all components are included.

LockLite comes with a 2-Year Manufacturer's Warranty.

What's covered:

• ✅ LED light strip failure or dimming
• ✅ Battery adapter malfunction
• ✅ Switch failure
• ✅ Wiring defects
• ✅ Manufacturing defects in materials or workmanship

What's NOT covered:

• ❌ Damage from improper installation
• ❌ Damage from misuse or abuse
• ❌ Adhesive failure due to improper surface prep
• ❌ Normal wear and tear

How to make a warranty claim:

• Email us at warranty@locklite.store with your order number and photos of the issue
• We'll diagnose the problem (usually within 24 hours)
• If covered, we'll send a replacement part or full unit at no charge

Yes! LockLite's quick-connect system lets you run up to 4 lights from a single battery adapter.

How it works:

• Each light has a quick-connect port
• Daisy-chain additional lights together
• Maximum: 4 lights per adapter (2400mm / ~8 feet of total lighting)

Battery impact:
Running multiple lights will reduce battery runtime proportionally. For example, 2 lights will drain the battery twice as fast as 1 light.

No. Using LockLite will not void your battery warranty.

Why? LockLite draws power the same way your power tools do—through the standard battery terminals. There's no modification to the battery itself.

Safety features:

• ✅ Voltage regulation prevents overload
• ✅ Low current draw (3-4 amps max)
• ✅ No risk of short circuit (built-in protection)

Important note: LockLite does NOT have low-voltage protection built-in. If you drain your battery too low, it could damage the battery. We recommend purchasing our optional low-voltage protection module ($15) for peace of mind.