4.6 / 5.0 (78 reviews)

LockLite 300mm LED Light Kit – 2 Pack

LockLite 300mm LED Light Kit – 2 Pack

$137.00 AUD
$137.00 AUD
Sold out

The no-BS way to light your toolbox. One kit, one simple setup: an LED bar to kill the dark, an adaptor that runs off your Makita, DeWalt or Milwaukee pack, 3M tape so there’s no drilling, and 2000 lumens that last 6+ hrs per charge. Job done.

Our 30-Day Money-Back Guarantee

If your toolbox ain’t lookin’ brighter, we’ll give you a refund.

2000Lumens
IP66Sealed
6+ hrsRuntime
2 minInstall

The whole install, on a stopwatch

Watch full video

01Wipe the surface, peel the 3M backing, press the bar home.

02Clip your Milwaukee, DeWalt or Makita pack into the mount.

03Flick the switch. 2000 lumens, corner to corner.

Real footage, real clock — done at 2:00. Tap to watch the full install.

Runs off your own tool batteriesMakita · DeWalt · Milwaukee
2000 lumens for 6+ hoursOne full shift per charge
Weather & dust resistantIP66 rated
The setup everyone asks aboutLook sorted on site

Why tradespeople are ditching their phone torch

5,000+ tradespeople sorted

 
LockLite
Other battery lights
 2-minute install — no drilling, no electrician
 Snaps onto your existing tool batteries (Makita, DeWalt, Milwaukee, Ryobi, HiKOKI)
 2000 lumen wide-angle flood — lights the whole canopy
 6+ hour runtime on one battery
 IP66 — dust-tight, waterproof, vibration-proof
 Built to last 2+ years on the job
 Australian-owned & local support
 30-day money-back guarantee

No drilling. No electrician. No hassle. Just light.

LockLite 300mm LED Light Kit – 2 Pack

$137.00
$137.00
Sold out
What customers say“The boys on site all asked where I got it. Looks the part, actually works. Reckon half the crew’s ordered one now.”— Trent, 29, Chippy
View full details

The whole install, on a stopwatch

Watch full video

01Wipe the surface, peel the 3M backing, press the bar home.

02Clip your Milwaukee, DeWalt or Makita pack into the mount.

03Flick the switch. 2000 lumens, corner to corner.

Real footage, real clock — done at 2:00. Tap to watch the full install.

Bright, tough lighting that survives the worksite — and runs off the same batteries already in your kit.

“I’m a Brisbane builder, not a marketer. I made this because I was done starting every day fumbling with a phone torch — now it just clips onto the batteries I already own. If it doesn’t earn its spot in 30 days, send it back.”
Casey Mayfield
Casey Mayfield
Founder · Builder, Brisbane

Up and Running in Under 2 Minutes

No electrician needed

The whole kit is peel-and-stick and plug-in — no hardwiring, no drilling, no wall power. If you can stick a hook on a wall, you can fit this in a coffee break.

1
Peel & Stick

Wipe, peel the 3M backing, press into place.

2
Clip In Battery

Slide your tool battery into the adaptor.

3
Flick the Switch

Lights up. Job done.

First-Timer Tips

Clean first: wipe the surface with a degreaser so the 3M grabs properly.
Mount it high: up high in the box throws light across the whole box.
Switch within reach: route it somewhere you can hit without looking.
Carry a spare: keep a charged battery in the kit for the long days.

What’s in the Kit

✓2 × 300mm LED lights
✓1 × battery converter mount — runs all 2 lights off one battery
✓4m × 12V cable
✓12 × cable ties + cable tie mounts
✓4 × quick connectors
✓12 × 3M industrial-strength double-sided tape

The Specs

LED length2 × 300 mm strips
Brightness2000 lumens
Runtime6+ hours on a single charge
Powered byYour existing power-tool battery
Battery fitMakita, Dewalt, Milwaukee
MountingHeavy-duty 3M peel-and-stick
RatingIP66 — dust & moisture resistant
In the box2 × LED strips, switch, 1 × battery adaptor, cable ties, connectors
Guarantee30-day money-back promise

3 Brightness Modes for Every Job

✓Low — Long RuntimeSoft, even light for close-up work that lasts all day.
✓Medium — EverydayThe go-to setting for lighting up the whole toolbox.
✓High — Flood ItThe full 2000 lumens to flood the entire truck bed or work area.

Pro Tip

  • Start on Low to stretch battery life, then bump to High when you need to flood the area.

Built for Real Worksites

✓IP66 rated — dust & moisture resistantSealed dust-tight and shrugs off rain, dew and washdowns.
✓Dust resistantSealed against the grit and dust of a job site.
✓Impact toughTakes the knocks that come with life in a tool box.
✓Vibration-proofStays stuck and stays working down the roughest tracks.
“Been bouncing around in my ute for months through rain and dust — still going strong.” — Josh P., Plumber

Where Tradespeople Run Locklite

✓Truck canopies & tool boxesThe classic — finally see every socket and fitting.
✓Work trailersLight up the whole trailer for early starts and late finishes.
✓Truck beds & service bodiesWide, even light across the entire bed.
✓Sheds, garages & 4WD setupsInstant lighting anywhere there’s no power point.
“Got one in the ute and one on the job trailer. The boys keep asking where I got ’em.” — Damo K., Builder – Sunshine Coast
Fast dispatch
30-day guarantee
Limited stock
Ships today
No hardwiring
30-day returns
Australian-owned

Our Story

Built by a tradesperson, for tradespeople

Casey Mayfield
After years of fumbling through a pitch-black toolbox at 5am — phone torch in one hand, gear everywhere — I’d had enough. I wanted a light that clipped straight onto the batteries already in my kit and lit the whole box. I couldn’t find one, so I built it. That’s Locklite.
Casey Mayfield
Founder · Builder, Brisbane

🔦 Light Up Your Toolbox the Smart Way

Snaps in. Lights up. Job done.

See Locklite in Action

Real kits, real trucks, real worksites.

Everything in the Locklite kit
In the Box

Everything you need, nothing you don’t

Every Locklite kit turns up ready to go — 300mm LED strip, battery adaptor, heavy-duty 3M tape, cabling, connectors and cable ties. Open the box, stick it in, clip on a battery. Done.

Locklite LED strip lighting a canopy
Bright Where It Counts

Floods the whole space

Mounts flush along your canopy or tailgate and throws wide, even light across the entire space — no shadows, no dark corners, no juggling your phone torch.

Locklite installed lighting a truck canopy
On the job

Find your gear in seconds

See every drawer, socket and fitting at a glance, even on the blackest 5am start. Runs 6+ hours off the same battery already in your kit.

Be the Setup Everyone Stares At

Locklite doesn’t just light your toolbox — it steals the spotlight.

Before

After

4.6

78 Reviews

Loading reviews…

You may also like

Protect your tools and charge your phone off the battery you already own.

SECURITYLockLite Rechargeable Toolbox Alarm LockLite Rechargeable Toolbox Alarm $39.00110dB alarm · USB-C rechargeable View details POWERLockLite PowerDock for Makita batteries LockLite PowerDock $95.00100W USB-C off your tool battery View details
🛡️

Try Locklite risk-free for 30 days

If it doesn’t make working out of your dark toolbox a hundred times easier, send it back for a full refund. No hassle, no fine print.

ADD TO CART →

Got questions? We’ve got straight answers — no fluff, no BS.

Will Locklite work with my power tool batteries?

Yes! Locklite works with most major battery platforms including Makita, Dewalt, Milwaukee, and more. Just choose your adapter when ordering.

What's in the kit?

  • 1 × 300mm LED light
  • 1 × battery converter mount
  • 2m × 12V cable
  • 6 × cable ties + cable tie mount
  • 2 × quick connectors
  • 6 × 3M industrial-strength double-sided tape

Do I need to drill or wire anything in?

Nope. Locklite installs in seconds using heavy-duty 3M mounting tape. No drilling, no tools, no headaches

Is it bright enough for night jobs?

Absolutely. Locklite pumps out a powerful 2000 lumens of wide-angle LED light — perfect for early starts, late shifts, or dark sheds.

Can it handle the weather?

You bet — Locklite is IP66 rated, so it's sealed dust-tight and shrugs off rain and washdowns. Built for real worksites, not showrooms.

What if something goes wrong?

We’ve got your back with local support and a 30-day money-back promise. You’re not dealing with some overseas drop shipper.